BlauTHERM 160mm Insulated MVHR Ventilation Ducting Balancing Damper

Em stock
Apenas resta(m) 150
SKU
BTIDD-160

A manual balancing damper for adjusting airflow during commissioning of insulated ventilation ducting. 160 mm nominal duct size.

  • Manual airflow control: Adjust the damper using its external control handle.
  • Commission to the design: Measure the airflow and set the damper to the required duty.
  • Balance duct branches: Position the control where adjustment is needed within the system.

BlauTHERM

Manual balancing damper

Set the airflow. Balance the system.

Adjust airflow during commissioning with a BlauTHERM manual balancing damper. The accessible control handle lets the installer set the airflow within an insulated ventilation ducting route.

160 mm nominal duct size.

  • Manual airflow control
  • Commissioning adjustment
  • Insulated EPP body

Features and benefits

Use a damper where the ventilation design calls for branch or main-run airflow adjustment. The EPP body and matching connections coordinate with the rest of the BlauTHERM insulated ducting range.

  • Manual airflow controlAdjust the damper using its external control handle.
  • Commission to the designMeasure the airflow and set the damper to the required duty.
  • Balance duct branchesPosition the control where adjustment is needed within the system.
  • Matching insulated connectionsCombine with the same-size BlauTHERM duct and fittings.
  • Accessible adjustmentPlan the installation so the handle remains available for commissioning and service.

Applications

For airflow balancing within suitable MVHR heat recovery, air-conditioning and extract ventilation ductwork.

Product information

Product codeBTIDD-160
EAN5056194058544
Nominal duct size160 mm
AdjustmentManual airflow balancing
MaterialExpanded polypropylene (EPP)
ConnectionsMatching push-fit BlauTHERM components

How to fit

  1. Match the damper to the nominal duct size and planned airflow-control position.
  2. Connect it into the supported duct run using clean, matching joints.
  3. Leave the control handle accessible.
  4. Measure airflow and adjust the damper during commissioning.

Check the finished system against the ventilation design after adjustment.

Mais informação
EAN Number5056194058544
© 2025 Blauberg UK Ltd. All rights reserved.