Smarter motor. Less power.
An efficient EC motor uses just 9 W on low speed and 14 W on high. Evolve-100 combines dependable extraction with low electrical demand.
Blauberg Evolve-100 100mm Low Energy Inline Extractor Fan – Standard
Em stock
Apenas resta(m) 102
SKU
EVOLVE-100
User Guides & Data Sheets
Evolve-100 – Low Energy Inline Extractor Fan
100 mm / 4 inch · Standard
- Low energy. Efficient EC motor: 9 W on low speed and 14 W on high speed.
- High airflow. Up to 210 m³/h (58 l/s) maximum free-air airflow through 100 mm connections.
- Standard control. External switched operation with no built-in timer.
- Two speeds. Low and high speed are both included, selected through installation wiring and suitable external switching.
- 5 year warranty. Low energy extraction, backed by the Evolve warranty.
Airflow figures are maximum free-air ratings; installed airflow depends on the duct system.
Evolve-100
100 mm / 4 inch · Standard
Low energy.High airflow.
High performance inline extractor fan.
Big on extraction.
Small on power demand.
Evolve-100 brings low energy extraction to 100 mm / 4 inch rigid duct systems, with two speeds and straightforward external switched control.
Airflow with purpose.
Mixed-flow extraction delivers up to 210 m³/h (58 l/s maximum free-air rating) through 100 mm connections. Select the appropriate speed for your room and duct run.
Efficiency on both speeds.
Low speed delivers up to 170 m³/h at a rated 9 W. High speed raises maximum airflow to 210 m³/h at 14 W. Both speeds are included; selection is through installation wiring and suitable external switching.
More air.
Less than half the power.
Evolve-100 increases maximum airflow from 187 to 210 m³/h compared with TURBO-E-100, while rated high-speed power falls from 33 W to just 14 W.
12%more maximum airflow*
58%lower rated power*
Rated power · lower is better
Maximum airflow · higher is better
*Rounded comparisons of the manufacturers’ published high-speed ratings for the 100 mm models. These compare rated power and maximum free-air airflow, rather than consumption at an identical installed duty point. Not a range-wide airflow claim. View the Blauberg TURBO-E-100 datasheet.
Out of the room.
Easy to get to.
Installed within a 100 mm duct run, Evolve-100 keeps the motor away from the room’s extract grille. Its compact body and mounting plate help it fit into a suitable ceiling void or accessible service space.
- Removable motor section for servicing without dismantling the connected ductwork.
- Impact- and corrosion-resistant ABS casing with IPX4 protection.
- Ball-bearing EC motor with thermal overheating protection.
- Wall or ceiling mounting with access maintained for inspection and cleaning.
Standard control. Two speeds.
Evolve-100 has no built-in timer. Operate it through a suitable external switch or control. Low or high speed is selected through installation wiring and suitable external switching, following the supplied instructions.
100 mm. Two speeds.
Clear performance.
Published motor performance for Evolve-100. Select the operating point using the required airflow and resistance of your installation.
Evolve-100
| Performance | Low speed | High speed |
|---|---|---|
| Power input | 9 W | 14 W |
| Max. airflow | 170 m³/h | 210 m³/h |
| Max. airflow, l/s* | 47 l/s | 58 l/s |
| Sound pressure at 3 m | 28 dB(A) | 29 dB(A) |
| Current | 0.10 A | 0.12 A |
| Motor speed | 2,204 rpm | 2,562 rpm |
- Nominal duct size
- 100 mm / 4 inch
- Motor
- Two-speed EC
- Supply, UK application
- 230 V, 50/60 Hz
- Casing
- ABS plastic
- Ingress protection
- IPX4
- Control
- Standard · no built-in timer
- Ambient temperature
- +1 to +40°C
- Transported air
- −25 to +40°C
- Overall L × W × H
- 246 × 167 × 190 mm
*l/s values are rounded as published in the manufacturer’s datasheet. Maximum airflow is a free-air value, not an installed extraction rate. Sound figures are published sound pressure levels at 3 m; room, ductwork and mounting affect the sound heard in use.
View airflow, pressure and power curves
Use the fan curve and your duct system resistance to select the operating point. “Min” and “max” refer to the two included speeds.
View dimensions and fitting information
| Dimension | Evolve-100 |
|---|---|
| Spigot ØD | 96 mm |
| Width B | 167 mm |
| Height H | 190 mm |
| Length L | 246 mm |
| Published base weight | 1.45 kg |
Use nominal 100 mm / 4 inch rigid ducting. Allow access around the fan for installation, wiring and removal of the motor section. Weight is the published base-size figure.
A few useful answers.
Straightforward answers about Evolve-100, the 100 mm Standard inline extractor fan.
What makes Evolve-100 a low energy extractor fan?
Its EC motor uses electronic control to drive the fan efficiently, with published power inputs of 9 W on low speed and 14 W on high speed.
What duct size does Evolve-100 use?
Use nominal 100 mm / 4 inch rigid ducting. The fan’s published spigot diameter is 96 mm. Match the duct system and fittings to this model and check the required airflow at the installed resistance.
Does Evolve-100 have a timer?
No. Evolve-100 is the Standard control version with no built-in timer. Use a suitable external switch or control, following the supplied wiring instructions.
Does Evolve-100 have two speeds?
Yes. Low and high speed are both included. Your installer selects the appropriate wiring and external switching for the application. This model does not include a built-in speed selector, and generic dimmer-style speed controllers must not be used.
Can Evolve be used for bathroom and shower extraction?
Yes, Evolve is designed for ducted extraction from bathrooms, shower rooms and other humid premises. Locate the fan in a suitable accessible position, within its permitted ambient temperature range, and have the electrical and ventilation installation designed and commissioned correctly. IPX4 is not, by itself, approval for every bathroom location.
Will it clear condensation?
Correctly sized extraction helps remove moisture-laden air at its source. Duct design, run time, replacement air and the building’s conditions all affect the result. With Standard control, the extraction run time is managed by the external switch or control; there is no built-in run-on timer.
Can the fan be serviced without removing the ductwork?
Yes. The removable central motor and impeller section is designed for servicing without dismantling the connected air ducts. Keep access available and isolate the electrical supply before maintenance.
Evolve-100 by Blauberg
Low energy. High airflow.
Two speeds. More choice.
Explore the published airflow, power and sound ratings for this model.
| EAN Number | 5056194057806 |
|---|---|
| Impeller Type | Mixed Flow |
| Motor Type | EC |
| Electrical Supply | 1 Phase 220/250 50/60Hz |
| Size | 100mm |
| Maximum Airflow Rate (l/s) | 58 |
| Maximum Airflow Rate (m3/h) | 210 |
| Control Options | Standard |
| Duct Connection Size | 100mm Dia |
| Power (Watts) | 14w |