Fresher Positive Input Ventilation Filtered Condensation Control Ventilator Fan

Em stock
Apenas resta(m) 24
SKU
FRESHER 50

Condensation | Filtration | Quiet | Efficiency

  • Through-wall PIV with no loft space required.
  • Two-stage filtration with an F8 fine filter.
  • Ultra-quiet operation from just 13 dB(A).
  • Low-energy EC motor using as little as 3.8 W.

Filtered Air In | A Fresher-Feeling Home

Filtered positive input ventilation

Fresher 50

Fresh, filtered air without needing a loft

A compact through-wall supply unit that quietly introduces filtered outdoor air, helping dilute humid, stagnant air and reduce the conditions that encourage window condensation and mould.

Blauberg Fresher 50 installed in a modern home
Maximum airflow
50 m³/h
Lowest sound level
13 dB(A)
Lowest fan power
3.8 W
Warranty
5 years

Stale, humid air is more than a comfort problem.

Everyday moisture can settle on cold windows and surfaces, creating the conditions in which condensation, musty smells and mould are more likely. The Fresher 50 provides a quiet, continuous route for filtered outdoor air—without a loft-mounted unit or extensive internal ductwork.

Why choose the Fresher 50?

A compact fresh-air solution built around everyday comfort

Designed for homes, flats, landlords and housing providers that need controlled fresh-air supply through an external wall.

Moisture

Help reduce condensation

Continuous fresh-air supply

Helps dilute humid indoor air and reduce moisture settling on cold surfaces.

Filtration

Finer filtered outdoor air

Coarse pre-filter + F8 filter

Helps reduce incoming pollen and fine particles while protecting the main filter.

Quiet

Unobtrusive operation

From 13 dB(A) at 3 metres

Acoustic material helps keep fan and outside noise comfortably low.

Efficiency

Low-energy ventilation

From only 3.8 W

An efficient EC motor delivers three useful airflow settings.

Cutaway view of flats fitted with Blauberg Fresher 50 ventilation units

Who is it for?

Fresh-air ventilation where loft PIV is not practical

The direct through-wall format makes the Fresher 50 particularly useful for flats, compact homes and local room-by-room ventilation strategies.

  • Homeowners: improve freshness and help address condensation-prone rooms.
  • Landlords: support property protection with low-energy ventilation.
  • Allergy-conscious households: reduce incoming pollen and fine particles with F8 filtration.
  • Installers and housing providers: use clear performance data and compatible multi-unit configurations.

How it works

A simple route to fresher, less humid indoor air

1

Outdoor air enters

Fresh air is drawn through the weather-protected external hood.

2

Particles are filtered

The coarse and F8 filter arrangement reduces larger and finer particles.

3

Humid air is diluted

Filtered supply air helps displace stale, moisture-laden indoor air.

Product comparison

Fresher 50 vs common ventilation alternatives

Choose it when a compact, filtered and supply-only through-wall solution best matches the property.

Whole-home option

Loft-mounted PIV

Useful where suitable loft space and distribution routes are available.

Typically supplies air centrally. It may not suit flats or properties without an accessible loft.

Recirculating option

Portable air purifier

Filters air already inside the room.

It can reduce airborne particles but does not introduce outdoor air or create a positive-pressure ventilation strategy.

Plan the installation

A direct wall solution that can scale across the property

Use a local supply point or connect compatible units across additional rooms. Product selection and unit quantity should reflect the property and ventilation design.

Diagram showing Fresher 50 units installed through external walls

Key dimensions

Fresher 50 dimension drawing
Indoor panel
235 × 285 mm
Panel depth
68 mm
Wall duct
Ø160 mm
Duct length
250–500 mm

Technical snapshot

Fresher 50 performance

Airflow
20 / 35 / 50 m³/h
Approximately 6 / 10 / 14 l/s
Sound at 3 metres
13 / 20 / 23 dB(A)
Across three speeds
Fan power
3.8 / 4.7 / 7.4 W
Low-energy EC motor
Ingress protection
IP24
For suitable locations

Built for straightforward care

The decorative front panel opens for direct access to the removable fan-and-filter cartridge. Regular inspection and filter replacement help maintain airflow and filtration performance.

Automatic shutters close when the fan stops, while the external hood helps protect against rain and foreign objects.

Three speeds and flexible control

Select one of three airflow settings. Suitable configurations may support remote operation, humidity or CO₂ control, and external switching.

Controls and accessories may be variant-dependent or sold separately. Electrical work should be completed by a suitably competent professional.

Good to know

Choose the right ventilation solution

Not a dehumidifier

It manages moisture by replacing and diluting humid air; it does not collect water.

No heat recovery or heater

Incoming air is filtered but is not actively warmed and exhaust heat is not recovered.

Plan the number of units

Larger properties may require multiple units or a designed whole-home system.

Five-year warranty

Register and maintain the product in line with Blauberg UK warranty terms.

Mais informação
EAN Number5060407918525
Impeller TypeAxial Flow
Motor TypeDC
Electrical Supply1 Phase 220/250 50/60Hz
Size160mm
Maximum Airflow Rate (l/s)28
Maximum Airflow Rate (m3/h)100
Control OptionsStandard
Duct Connection Size160mm Dia
© 2025 Blauberg UK Ltd. All rights reserved.