PinkGuard™ 100mm Dia Performance Thermal Acoustic Insulated Flexible Ducting Kit - 5m
User Guides & Data Sheets
PinkGuard™ - Performance Insulated Ducting
Mould | Heat | Noise | Eco
- ✓ Double thermal resistance.
- ✓ Up to 2x sound absorption.
- ✓ Tested mould resistance.
- ✓ Low-emission. More sustainable.
Twice The Protection | Half The Risk
PinkGuard™ 100mm Performance Insulated Flexible Ducting Kit
High-performance 100mm insulated flexible ducting for bathroom extractor fans, wet rooms, dMEV systems and compact domestic ventilation routes through lofts, roof spaces and ceiling voids.
100mm ducting is small, but the risk is not.
Bathroom and wet room extract systems often use 100mm ducting through cold lofts or roof spaces. Standard flexible ducting can lose heat, carry noise and increase condensation risk in exactly the places customers rarely inspect.
Why choose 100mm PinkGuard™?
Better protection for compact ventilation routes
PinkGuard™ 100mm ducting gives bathroom extract, wet room, dMEV and domestic ventilation systems a stronger insulated route through cold or noise-sensitive spaces.
Thermal protection
Helps reduce heat loss and temperature drop where 100mm ducting passes through colder spaces.
Moisture-aware detail
Supports better protection where warm, humid bathroom air travels through cold lofts or roof voids.
Quieter extraction
Acoustic insulation helps reduce duct-borne sound from fans and airflow in compact extract routes.
Tested resistance
Material evidence supports moisture-aware ventilation installations where mould risk matters.
Common 100mm applications
Ideal for smaller extract systems
Use PinkGuard™ 100mm where the system design specifies a 100mm duct diameter and the ducting passes through a cold, unheated or noise-sensitive route.
- Bathroom extractor fan ducting
- Wet room ventilation routes
- dMEV and compact domestic systems
- Cloakroom and utility extract runs
- Cold lofts and roof spaces
- Ceiling voids and service zones
100mm product comparison
PinkGuard™ 100mm vs standard 100mm ducting
A better 100mm ducting detail helps reduce hidden risks before they become noise, condensation or callback problems.
Standard 100mm flexible ducting
- Suited to simple compact extract runs.
- Little built-in thermal protection.
- May leave loft routes exposed to condensation risk.
- Limited acoustic support.
PinkGuard™ 100mm
- Built for bathroom extract, wet rooms and dMEV routes.
- R 1.41 m²K/W thermal resistance.
- NRC 0.65 sound absorption rating.
- UL 181 mould-resistance evidence.
Typical insulated 100mm ducting
- May help reduce temperature drop.
- Insulation thickness and material can vary.
- Acoustic support depends on product evidence.
- Mould-resistance data may not always be clear.
Ready to specify 100mm PinkGuard™
Use the 100mm kit where bathroom, wet room, kitchen or smaller extract routes need a better insulated duct run through cold or noise-sensitive spaces.
100mm FAQs
Questions about PinkGuard™ 100mm ducting
Is 100mm PinkGuard™ suitable for bathroom extractor fans?
Yes, where the fan and system design specify a 100mm duct connection. It is well suited to bathroom and wet room extract routes through cold lofts or roof spaces.
Does 100mm insulated ducting help reduce condensation?
It can help by reducing heat loss and temperature drop through exposed ducting, which supports a better approach to condensation risk.
Can I use this for dMEV systems?
Yes, where a 100mm duct diameter is specified and the installation route is suitable. Always check the unit guidance and project design.
Where should 100mm PinkGuard™ be used?
Use it where 100mm ducting passes through cold, unheated or noise-sensitive spaces such as lofts, roof voids and ceiling voids.
Ready to protect your 100mm extract route?
Use PinkGuard™ 100mm where bathroom, wet room and kitchen extract runs need better thermal, acoustic and condensation-aware protection before the ducting is hidden away.
- 100mm diameter
- 5m insulated kit
- R 1.41 m²K/W
- NRC 0.65
| EAN Number | 5056194057561 |
|---|---|
| Size | 100mm |
| Color | Silver |
| Length | 5 Metres |
| Duct Connection Size | 100mm Dia |
| Delivery Lead Time | Normal |